Depending on the field of application and the requirements of system, it is preferable to one of three types of normalization of signal. For example, serial connections and network are not usually normalized. In television field, the routing of various signals may change frequently, depending on the production requirements (DIN Rail Fiber Optic Patch Panel). A patchbay is a system rather flexible to achieve the required connections, although the use of a dedicated matrix is more simple and efficient.
The main purpose of wiring is disconnected to allow the realization of different connections between the signals in a simple and cheap, avoiding the use of more complex tools switching. An early form of patchbay is with the manual telephone exchanges, in which the connections were made manually. With time, this use has been abandoned in favor ofutomatic switching systems.
The use of patchbay is rather large in entertainment industry and more particularly in television, and is also widely used in computer networks. Disconnection video signals of mobile direction. Note on left a series of panels not normalized with fittings inserted and, in blue, a rope. Each type wiring is suitable in principle to use of patchbay. Depending on type signal, changes the type cable that carries it and the type connector used. Common examples of patchbay are: Video signals over coaxial cable 75. There are different specifications depending on type video.
In building technology patchbays (there usually referred to as patchbay) used to interconnect all distributed over a larger area terminal connections to a central point can. To facilitate handling and to increase the clarity, patchbays, certain signaling pathways have pre-configured internally connected without plugging the cable.
This is useful, for example when the microphone input of a mixer, where, according to microphone often a preamplifier (integrated in mixer or external), an equalizer and a compressor in a row are connected. Each trail with each other via a socket pair distribution box is completed, the output of previous device is usually above, the input of next down.
The types of looping through is customizable with many devices from the user, it can switch to happen the exchange of individual modules or soldering. The signal is looped through to a normalized pair of sockets without plugging the cable via an internal bridge from education to entrance. If a connector is performed in one of two sockets, the bridge will be interrupted.
The great innovation introduced in our time is to be able to "tame" the light, so that it is possible to spread within a man laying cable. The use of guided light, so it does not expand in all directions, but in a very concrete and predefined has been achieved through the optical fiber, we can think like a glass pipe -glass fibers ultra delgada- protected by a insulating material serves to transport the light signal from one point to another.
Depending on use, there are three types of disconnectors, whose normalization of signals may be absent or complete, or it may be disconnectors. The normalization indicates the way in which the elements of single module are wired internally. In a form without normalization, a rope is required for the transit of signal (or a dedicated short cable to U), while in a normalized form the input signal to patch panel is always connected to corresponding output.
The main purpose of wiring is disconnected to allow the realization of different connections between the signals in a simple and cheap, avoiding the use of more complex tools switching. An early form of patchbay is with the manual telephone exchanges, in which the connections were made manually. With time, this use has been abandoned in favor ofutomatic switching systems.
The use of patchbay is rather large in entertainment industry and more particularly in television, and is also widely used in computer networks. Disconnection video signals of mobile direction. Note on left a series of panels not normalized with fittings inserted and, in blue, a rope. Each type wiring is suitable in principle to use of patchbay. Depending on type signal, changes the type cable that carries it and the type connector used. Common examples of patchbay are: Video signals over coaxial cable 75. There are different specifications depending on type video.
In building technology patchbays (there usually referred to as patchbay) used to interconnect all distributed over a larger area terminal connections to a central point can. To facilitate handling and to increase the clarity, patchbays, certain signaling pathways have pre-configured internally connected without plugging the cable.
This is useful, for example when the microphone input of a mixer, where, according to microphone often a preamplifier (integrated in mixer or external), an equalizer and a compressor in a row are connected. Each trail with each other via a socket pair distribution box is completed, the output of previous device is usually above, the input of next down.
The types of looping through is customizable with many devices from the user, it can switch to happen the exchange of individual modules or soldering. The signal is looped through to a normalized pair of sockets without plugging the cable via an internal bridge from education to entrance. If a connector is performed in one of two sockets, the bridge will be interrupted.
The great innovation introduced in our time is to be able to "tame" the light, so that it is possible to spread within a man laying cable. The use of guided light, so it does not expand in all directions, but in a very concrete and predefined has been achieved through the optical fiber, we can think like a glass pipe -glass fibers ultra delgada- protected by a insulating material serves to transport the light signal from one point to another.
Depending on use, there are three types of disconnectors, whose normalization of signals may be absent or complete, or it may be disconnectors. The normalization indicates the way in which the elements of single module are wired internally. In a form without normalization, a rope is required for the transit of signal (or a dedicated short cable to U), while in a normalized form the input signal to patch panel is always connected to corresponding output.
No comments:
Post a Comment