Monday, February 22, 2016

The Reasons For Installing An Eye Washing Station

By Carolyn McDonald


There are a variety of risks in every job. For chemical and industrial workers, the main risk is chemical exposure. Medical practitioners and laboratory workers also fall into this category. While most exposures are accidental, it is important to be proactive. These jobs require that one is appropriately dressed. Protective gear is the most important. The right shoes and clothing must be on at all times. However, in the case of exposure measures should be taken. The most important measure is the first aid. The eye washing station is one such immediate response measure to safety.

A flush station is used to minimize the impact of the exposure in the eye and facial region. It contains fluids that neutralize the chemical effects. An analysis is carried out. The range of chemicals in the lab area is categorized. The different classes are then investigated for possible extent damages. The fluid in the facial cleaning region must neutralize the effectiveness of the chemical.

Law enforcement agencies have it as a requirement. All facilities involved in handling hazardous chemicals ought to have a facial cleaning area. For the building plans to be approved, these areas must be included. Most importantly, they must be sufficient for the number of workers in the facility. Also, they must be readily accessible. That guarantees the protection of the sight of anybody working in the industry.

Trained workers have the minimum risk of exposure. Additionally, they know the amount of time required to clean up the exposed facial area. The time is dependent on the nature of the chemical. Alkaline, saline, and acidic chemicals may have varying severity. Managers should have workers trained on safety standard operating procedure. Some mild chemical may require 15- 20 minutes rinsing time. Others may take up to 60 minutes to be cleaned completely.

There are a myriad of designs of facial flushing fluid stations. There is no specific standard design. The standard is dependent on the nature of work and the industrial structure. It should, however, be adjustable to suit people of different heights.

Clothes can also be flushed at the eye washing area. When small spillages occur on clothing items, they should be rinsed thoroughly. Clothes that come into contact may harm wearers by proxy. After a thorough rinse, the clothes ought to be discarded of taken through further cleaning. When the exposure on clothing is extensive, emergency showers must be available. Emergency showers rinse the whole body from the head to toes.

Portable eye rinsing bottles are also available. They are suitable for jobs that allow one to carry them around. They can also be used for outdoor activities. Portable facial washing bottles are the best as there is minimum response time. This way, the damages are minimized if not totally averted.

Managers running labs and industrial facilities must be careful to adhere to the law. It is within the worker rights to be protected at work. More importantly, it is in the best interest of the company to retain their competent workers. When used within the required minimum time and maximum use, the eye flushing unit is efficient. Portable flushing fluids are the best. It should be noted that after rinsing, a physician must investigate the area. There are companies offering safety solutions for chemical workers. They must consult widely and have these installed. The managers should run safety training for their staff.




About the Author:



No comments:

Post a Comment